Avsl 130.050 MSPL03 User Manual download pdf

MSPL03

WIDEBAND MASTHEAD SIGNAL

SPLITTER

Item ref: 130.050UK

User Manual

SPECIFICATION:

Frequency range: 5 - 2400MHz

Insertion loss: 6.5 – 9.5dB

Return loss: 10dB

Isolation: 20dB

DC power pass (Max): 24V/200mA

Dimensions & weight: 110 x 80 x 45mm, 130g

INTRODUCTION:

Thank you for choosing this Mercury masthead splitter. It is designed to be installed after a masthead

amplifier or after a satellite LNB to allow distribution of TV or satellite signals. Supplied in IP44 rated

casing for outdoor installation.

- F-type connector for secure connection.

- Fully shielded for minimum signal interference.

- DC pass allows power for LNB or masthead amplifier.

- Wideband frequency response compatible with FM/DAB/DTV(DVB-T, ATSC, ISDB-T, T-

DMB)/satellite.

INSTALLATION:

Before installing, to avoid danger of electric shock, please ensure that all equipment is turned off and

disconnected from the mains supply.

For TV signal connect the output of the masthead amp to the input of the splitter, and the output of

the splitter to various designated receivers and TV. Please note, only one power supply will be

required to connect to the output of splitter to power the masthead amplifier.

1 2

MSPL03 WIDEBAND MASTHEAD SIGNAL SPLITTER Item ref: 130.050UK User Manual SPECIFICATION: Frequency range: 5 - 2400MHz Insertion loss: 6.

130.050UK User Manual For satellite signal distribution: After all cables have been attached, please use the supplied cable tie to secure the splitt

No comments

Avsl 130.050 MSPL03 User Manual