Avsl 153.810 SL2-PL User Manual download pdf

SL2-PL

2-WIRE LED STRIP POWER LEAD

Item ref: 153.810UK

User Manual

NOTE: This product operates at high voltage and is for professional use ONLY!

Installation should be performed only by fully qualified personnel.

INCLUDED: End Cap (153.814UK), 2-pin Coupler (153.812UK), Heat-shrink Tubing

(153.815UK)

WARNING: Please do not connect any part to the mains until steps 1-4 have been

completed. For water-tight bonds, silicone Glue (153.627UK) is recommended.

A maximum total length of 100m can be connected to a single power lead.

1) Roll out the LED Strip from the reel and cut to size only at the clearly marked

scissor points. Ensuring you use a sharp cutting knife or scissors.

2) Use the supplied end cap to terminate the open end of the strip by filling the

end cap ½ way with silicone glue and pushing firmly on the end of the strip.

Wipe excess glue away and leave to dry for 10 minutes.

1 2

SL2-PL 2-WIRE LED STRIP POWER LEAD Item ref: 153.810UK User Manual NOTE: This product operates at high voltage and is for professional use ONLY

153.810UK User Manual 3) At the opposite end, push a 2 pin coupler firmly in to the strip, ensuring the sharp pins go into the centre of the wires w

No comments

Avsl 153.810 SL2-PL User Manual